Uses of Class
org.opentrafficsim.core.geometry.OTSGeometryException

Packages that use OTSGeometryException

Package	Description
org.opentrafficsim.core.geometry	Copyright (c) 2013-2016 Delft University of Technology, PO Box 5, 2600 AA, Delft, the Netherlands.
org.opentrafficsim.core.gtu.plan.operational	Operational plans describe a path through the world with a speed profile that a GTU intends to follow.

Uses of OTSGeometryException in org.opentrafficsim.core.geometry

Methods in org.opentrafficsim.core.geometry that throw OTSGeometryException

Modifier and Type	Method and Description
static TestIntersectionPerformance.Results	TestIntersectionPerformance.baseTest(int numShapes, int numVertices, double desiredHitFraction, int numRuns, boolean verbose, int variant) Perform a test.
static OTSLine3D	Bezier.bezier(int numPoints, OTSPoint3D... points) Construct a Bézier curve of degree n.
static OTSLine3D	Bezier.bezier(OTSPoint3D... points) Construct a Bézier curve of degree n.
static OTSLine3D	Clothoid.clothoid(OTSPoint3D start, org.djunits.value.vdouble.scalar.Direction startDirection, double startCurvature, double endCurvature, org.djunits.value.vdouble.scalar.Length length, org.djunits.value.vdouble.scalar.Length endElevation, int numSegments) Approximate a clothoid.
static OTSLine3D	Clothoid.clothoid(OTSPoint3D start, org.djunits.value.vdouble.scalar.Direction startDirection, double endCurvature, org.djunits.value.vdouble.scalar.Length length, org.djunits.value.vdouble.scalar.Length endElevation, int numSegments) Approximate a clothoid with curvature 0 at start.
static OTSLine3D	Clothoid.clothoid(OTSPoint3D start, org.djunits.value.vdouble.scalar.Direction startDirection, org.djunits.value.vdouble.scalar.LinearDensity endCurvature, org.djunits.value.vdouble.scalar.Length length, org.djunits.value.vdouble.scalar.Length endElevation, int numSegments) Approximate a clothoid with curvature 0 at start.
static OTSLine3D	Clothoid.clothoid(OTSPoint3D start, org.djunits.value.vdouble.scalar.Direction startDirection, org.djunits.value.vdouble.scalar.LinearDensity startCurvature, org.djunits.value.vdouble.scalar.LinearDensity endCurvature, org.djunits.value.vdouble.scalar.Length length, org.djunits.value.vdouble.scalar.Length endElevation, int numSegments) Approximate a clothoid.
static OTSLine3D	OTSLine3D.concatenate(double toleranceSI, OTSLine3D... lines) Concatenate several OTSLine3D instances.
static OTSLine3D	OTSLine3D.concatenate(OTSLine3D... lines) Concatenate several OTSLine3D instances.
static OTSLine3D	OTSLine3D.createAndCleanOTSLine3D(List<OTSPoint3D> pointList) Create an OTSLine3D, while cleaning repeating successive points.
static OTSLine3D	OTSLine3D.createAndCleanOTSLine3D(OTSPoint3D... points) Create an OTSLine3D, while cleaning repeating successive points.
static OTSShape	OTSShape.createAndCleanOTSShape(List<OTSPoint3D> pointList) Create an OTSLine3D, while cleaning repeating successive points.
static OTSShape	OTSShape.createAndCleanOTSShape(OTSPoint3D[] points) Create an OTSLine3D, while cleaning repeating successive points.
static OTSLine3D	Bezier.cubic(DirectedPoint start, DirectedPoint end) Construct a cubic Bézier curve from start to end with two generated control points at half the distance between start and end.
static OTSLine3D	Bezier.cubic(int numPoints, DirectedPoint start, DirectedPoint end) Construct a cubic Bézier curve from start to end with two generated control points at half the distance between start and end.
static OTSLine3D	Bezier.cubic(int numPoints, DirectedPoint start, DirectedPoint end, double shape) Construct a cubic Bézier curve from start to end with two generated control points at half the distance between start and end.
static OTSLine3D	Bezier.cubic(int numPoints, OTSPoint3D start, OTSPoint3D control1, OTSPoint3D control2, OTSPoint3D end) Construct a cubic Bézier curve from start to end with two control points.
OTSLine3D	OTSLine3D.extract(double start, double end) Create a new OTSLine3D that covers a sub-section of this OTSLine3D.
OTSLine3D	OTSLine3D.extract(org.djunits.value.vdouble.scalar.Length start, org.djunits.value.vdouble.scalar.Length end) Create a new OTSLine3D that covers a sub-section of this OTSLine3D.
OTSLine3D	OTSLine3D.extractFractional(double start, double end) Construct a new OTSLine3D covering the indicated fraction of this OTSLine3D.
OTSPoint3D	OTSLine3D.get(int i) Return one point of this OTSLine3D.
DirectedPoint	OTSLine3D.getLocation(org.djunits.value.vdouble.scalar.Length position) Get the location at a position on the line, with its direction.
DirectedPoint	OTSLine3D.getLocationFraction(double fraction) Get the location at a fraction of the line, with its direction.
DirectedPoint	OTSLine3D.getLocationFraction(double fraction, double tolerance) Get the location at a fraction of the line, with its direction.
DirectedPoint	OTSLine3D.getLocationSI(double positionSI) Get the location at a position on the line, with its direction.
static void	TestIntersectionPerformance.main(String[] args) Measure the performance.
static void	Test2.main(String[] args)
static void	Test.main(String[] args)
static void	OTSShape.main(String[] args) Small test.
static void	OTSLine3D.main(String[] args)
static void	OTSBufferingJTS.main(String[] args)
static void	Clothoid.main(String[] args) Demonstrate / test the clothoid methods.
static void	Bezier.main(String[] args)
(package private) static OTSShape	TestIntersectionPerformance.makeNGon(int numVertices, double r, double cX, double cY) Create and return an OTSShape.
static OTSLine3D	OTSBufferingJTS.offsetGeometryOLD(OTSLine3D referenceLine, double offset) Generate a Geometry that has a fixed offset from a reference Geometry.
OTSLine3D	OTSLine3D.offsetLine(double[] relativeFractions, double[] offsets) Create a line at linearly varying offset from this line.
OTSLine3D	OTSLine3D.offsetLine(double offsetAtStart, double offsetAtEnd) Create a line at linearly varying offset from this line.
static OTSLine3D	OTSOffsetLinePK.offsetLine(OTSLine3D referenceLine, double offset) Construct an offset line.
static OTSLine3D	OTSBufferingJTS.offsetLine(OTSLine3D referenceLine, double offsetAtStart, double offsetAtEnd) Create a line at linearly varying offset from a reference line.
static void	Test.test1() Kink near end of design line.
static void	Test.test2() Kink halfway (far from any endpoint).
static void	Test.test3() Kink plus decreasing width.
static void	Test.test4() Two kinks, (too) close together.
static void	Test.test5() Two-segment design line with minimal change of direction.
static void	Test.test6() Straight design line with some noise (sufficiently far from the end points).
static void	Test.test7() Straight design line with more noise (sufficiently far from the end points).
static void	Test.test8() Straight design line with more noise (close to the end points).
OTSLine3D	OTSLine3D.truncate(double lengthSI) Truncate a line at the given length (less than the length of the line, and larger than zero) and return a new line.

Constructors in org.opentrafficsim.core.geometry that throw OTSGeometryException

Constructor and Description
OTS2DSet(Rectangle2D boundingBox, double minimumCellSize) Construct an empty OTS2DSet for a rectangular region.
OTSLine3D(com.vividsolutions.jts.geom.Coordinate[] coordinates) Construct a new OTSLine3D from an array of Coordinate.
OTSLine3D(com.vividsolutions.jts.geom.Geometry geometry) Construct a new OTSLine3D from a Geometry.
OTSLine3D(com.vividsolutions.jts.geom.LineString lineString) Construct a new OTSLine3D from a LineString.
OTSLine3D(List<OTSPoint3D> pointList) Construct a new OTSLine3D from a List<OTSPoint3D>.
OTSLine3D(OTSPoint3D... points) Construct a new OTSLine3D.
OTSLine3D(Path2D path) Construct a new OTSShape (closed shape) from a Path2D.
OTSShape(com.vividsolutions.jts.geom.Coordinate[] coordinates) Construct a new OTSShape (closed shape) from an array of Coordinate.
OTSShape(com.vividsolutions.jts.geom.Geometry geometry) Construct a new OTSShape (closed shape) from a Geometry.
OTSShape(com.vividsolutions.jts.geom.LineString lineString) Construct a new OTSShape (closed shape) from a LineString.
OTSShape(List<OTSPoint3D> pointList) Construct a new OTSShape (closed shape) from a List<OTSPoint3D>.
OTSShape(OTSPoint3D... points) Construct a new OTSShape (closed shape).
OTSShape(Path2D path) Construct a new OTSShape (closed shape) from a Path2D.

Uses of OTSGeometryException in org.opentrafficsim.core.gtu.plan.operational

Methods in org.opentrafficsim.core.gtu.plan.operational that throw OTSGeometryException

Modifier and Type	Method and Description
static void	OperationalPlanBuilder.main(String[] args) Test.